<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom"><channel><title>Fp7 Gossamer — From the blog</title><link>https://fp7-gossamer.eu/</link><atom:link href="https://fp7-gossamer.eu/rss.xml" rel="self" type="application/rss+xml"/><description>Bench notes, retention comparisons, and explainers on charge trap flash memory.</description><language>en</language>
<item><title>Reading retention curves from nitride trap energy depth</title><link>https://fp7-gossamer.eu/blog/reading-retention-curves-nitride-trap-energy/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/reading-retention-curves-nitride-trap-energy/</guid><pubDate>Thu, 19 Nov 2026 09:00:00 GMT</pubDate><category>Explainers</category><description>When you pull a retention bake out of the oven and plot the window loss against time, the shape of that curve carries information about where the charge sat in the nitride. Traps at different energy depths release electrons at different rates, and that distribution shows up as a slope. If you have ever stared at two curves that both lose charge but do so at different angles, the difference is often trap depth rather than a processing mistake. Reading retention curves gets easier once you separate the shallow traps from the deep ones and stop treating the whole nitride…</description></item>
<item><title>Setting up a simple retention bake test at home: a practical plan for charge trap samples</title><link>https://fp7-gossamer.eu/blog/setting-up-simple-retention-bake-test/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/setting-up-simple-retention-bake-test/</guid><pubDate>Sun, 15 Nov 2026 09:00:00 GMT</pubDate><category>Practical Guides</category><description>A retention bake is the cheapest experiment in charge trap flash work and the easiest one to get wrong. You do not need a full lab to run a useful one. A stable oven, a handful of samples, a logbook, and a habit of writing things down at the same moment every time will get you data you can defend. This guide is for readers who have a few TANOS or nitride-only coupons on hand and want to see how the programmed window moves over days and weeks. We walk through the plan we use ourselves, including the parts that…</description></item>
<item><title>What our spring retention tests showed about sealing layers</title><link>https://fp7-gossamer.eu/blog/spring-retention-tests-showed-about-sealing/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/spring-retention-tests-showed-about-sealing/</guid><pubDate>Wed, 11 Nov 2026 09:00:00 GMT</pubDate><category>Results</category><description>Between late March and mid-May we ran a limited set of retention bake tests on charge trap cells built with and without a thin sealing layer over the nitride. The plan was modest: four bake temperatures, two splits, and enough parts to see whether the sealing layer changes how charge leaves the trapping layer over time. We baked in two ovens, logged every step, and wrote down what we expected before opening the data. What we got is a partial answer. The sealing layer helped in the warm bakes and barely mattered at room temperature. Along the way we also…</description></item>
<item><title>Why We Started Writing Open Notes on Charge Trap Flash</title><link>https://fp7-gossamer.eu/blog/started-writing-open-notes-charge-trap/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/started-writing-open-notes-charge-trap/</guid><pubDate>Mon, 09 Nov 2026 09:00:00 GMT</pubDate><category>People Stories</category><description>The first notes were not meant for anyone outside the room. In the fall of 2009, a handful of memory engineers left a regional seminar in Monterey with the same complaint: the most useful conversations had happened in the hallway, not on the slides. One of them, a process engineer named Aude, had a spiral notebook full of retention measurements from a TANOS stack she had been cycling for weeks. Another had a sketch of a sealing layer experiment that never made it into a talk. By the time the coffee ran out, they had agreed to photocopy their notes…</description></item>
<item><title>How we run a monthly one-hour online seminar, from picking a speaker to posting notes</title><link>https://fp7-gossamer.eu/blog/run-monthly-online-seminar/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/run-monthly-online-seminar/</guid><pubDate>Sat, 07 Nov 2026 09:00:00 GMT</pubDate><category>Practical Guides</category><description>We are a volunteer community of semiconductor memory researchers and engineers, and we run a one-hour online seminar every month. This guide describes our format from start to finish: how we choose a speaker, what we send them beforehand, how we keep the hour moving, and how we turn the discussion into notes that people can read later. It is written for other small technical groups who want a low-cost, low-stress way to share work in progress. You do not need a budget or a platform license. You need a calendar, a shared document, and someone willing to send reminders…</description></item>
<item><title>Seminar recap: comparing trap layers across three lots</title><link>https://fp7-gossamer.eu/blog/seminar-recap-comparing-trap-layers-across/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/seminar-recap-comparing-trap-layers-across/</guid><pubDate>Tue, 03 Nov 2026 09:00:00 GMT</pubDate><category>Community Notes</category><description>We held our monthly seminar on the second Thursday in October, online as usual, with twelve members joining from home benches and shared lab spaces across three time zones. The topic was lot-to-lot variation in nitride trapping layers, something several of us have bumped into quietly when comparing retention curves from parts that should have been identical. Sam Whitfield coordinated, and we kept the session to one hour: two short sets of observations, then open discussion. Our goal was not to settle the question but to agree on what to measure next. As with all our sessions, the notes below…</description></item>
<item><title>Erase speed and retention trade-offs in TANOS stacks</title><link>https://fp7-gossamer.eu/blog/erase-speed-retention-trade-offs-tanos/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/erase-speed-retention-trade-offs-tanos/</guid><pubDate>Fri, 30 Oct 2026 09:00:00 GMT</pubDate><category>Explainers</category><description>In TANOS memory cells, the erase step and the retention step pull in opposite directions. Erase wants charges to move quickly through the tunneling oxide and into the nitride. Retention wants those same charges to stay put for years. Engineers talk about this as a trade-off because steps that speed up erase can also open paths for charge to leak away later. This explainer walks through the field, the charge movement, and the material choices that shift the balance. If you are new to the topic, it is a good warm-up before our next seminar on trap layer comparisons.</description></item>
<item><title>Why we check numbers twice before posting results</title><link>https://fp7-gossamer.eu/blog/check-numbers-twice-before-posting-results/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/check-numbers-twice-before-posting-results/</guid><pubDate>Mon, 26 Oct 2026 09:00:00 GMT</pubDate><category>People Stories</category><description>On a Tuesday evening in March, Mira Okafor sat at her kitchen table in Ann Arbor with a spreadsheet open and a mug of tea going cold. She had spent the weekend running a retention bake on four small nitride samples, and the numbers looked clean: one stack held its window noticeably better than the others after 24 hours at 150°C. Before she typed a single line for the blog, she saved the file and sent it to a second pair of eyes, which is the rule we have followed since we started writing open notes on charge trap flash…</description></item>
<item><title>Three open questions on measuring trap density in nitride layers</title><link>https://fp7-gossamer.eu/blog/three-open-questions-nitride-material-analysis/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/three-open-questions-nitride-material-analysis/</guid><pubDate>Fri, 23 Oct 2026 09:00:00 GMT</pubDate><category>Results</category><description>Every few weeks, the same three questions about nitride trap density come back to us — in seminar chat, in email threads, and in the margins of draft notes. They are good questions, and they point at real gaps in what we have tested so far. This roundup collects them, sets out what our published notes currently answer, and marks where we think a careful, repeatable test is still needed. If you have been meaning to ask one of these yourself, you are in good company. We have also included a pointer to our reading list for background on the…</description></item>
<item><title>Reading list: charge trap papers worth a slow second pass</title><link>https://fp7-gossamer.eu/blog/reading-list-charge-trap-papers-worth/</link><guid isPermaLink="true">https://fp7-gossamer.eu/blog/reading-list-charge-trap-papers-worth/</guid><pubDate>Mon, 19 Oct 2026 09:00:00 GMT</pubDate><category>Community Notes</category><description>We keep a short shelf of papers that predate most of our current work but still shape how we read retention curves and stack cross-sections. These are not the newest results. They are the ones members bring back to seminars, often with a page already dog-eared. In this roundup we list six favorites, say what each one got right, and note where the evidence runs out. We picked them during a work session in late winter, after a discussion on trap layer comparisons across lots kept circling back to the same nitride analysis.</description></item>
</channel></rss>
